Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of STYRON A-TECH™ 1210 - (PS-HI) - Trinseo

Material Data Center offers the following functions for STYRON A-TECH™ 1210:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Styron A-Tech datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 기계적 특성 - 열적 특성 - 기타 특성
Any use of this information falls under the rules of our disclaimer.
Processing/Physical Characteristics값단위시험규격
ISO 데이터
용융 흐름성, MFI 3.4 g/10min ISO 1133
온도 200 °C -
负荷 5 kg -
ASTM 데이터
용융 흐름성, MFI 3.4 g/10min ASTM D 1238
온도 200 °C -
하중 5 kg -
기계적 특성값단위시험규격
ISO 데이터
인장탄성률 1750 MPa ISO 527
항복강도 19.5 MPa ISO 527
파단시 강도 22 MPa ISO 527
파단시 신율 65 % ISO 527
굴곡 계수, 23°C 1950 MPa ISO 178
굴곡 강도 38 MPa ISO 178
ASTM 데이터
인장탄성률 1750 MPa ASTM D 638
항복강도 19.5 MPa ASTM D 638
파단시 강도 22 MPa ASTM D 638
파단시 신율 65 % ASTM D 638
굴곡 계수 1950 MPa ASTM D 790
굴곡 강도 38 MPa ASTM D 790
열적 특성값단위시험규격
ISO 데이터
비카트 연화 온도, A 98 °C ISO 306
ASTM 데이터
비카트 연화 온도 98 °C ASTM D 1525
기타 특성값단위시험규격
밀도 1040 kg/m³ ISO 1183
Bulk density 600 kg/m³ -
밀도 1040 kg/m³ ASTM D 792
특징
생산 공정
시트 압출, 열성형
특별 특성
고충격 또는 고충격 보강
특성
Blending Resin
Certifications
Food contact, Food approval 10/2011, Food approval FDA 21 CFR
응용
의료, 포장
지역별 검색
짱쨌쨈, 쨉쩔쩐챌 쨔횞 쩐횈횉횁쨍짰횆짬 짹횢쩔짧
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.